Panic Keys - Honeywell LYNX Touch Security System User Manual

Activating a Panic Alarm
Ready To Arm
Arm Away Arm Stay
Delay
10:18 AM June 8, 2010
Ready To Arm
Police Fire
Fire Alarm
Fire Alarm
Fire
Enter Code:
Cancel
72
Zones Automation
Message Phone
More
5000-100-006-V1
Medical
5000-100-068-V0
1 2 3
4 5 6
7 8 9
Clear 0
5000-100-149-V0
– 31 –
SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES
1. With the system in the disarmed or armed
state, depress and hold the "Panic" key until
the system displays the Panic screen
(approximately 3-4 seconds).
2. Touch the desired panic icon on the screen.
3. If applicable, the alarm sounds and the
associated icon is displayed.
Note: Dependant upon how your system has
been programmed a keypad may be
displayed. This will allow you to cancel
the alarm by entering valid User Code
on the keypad.

Panic Keys