Honeywell LYNX TOUCH Quick Manual

LYNX TOUCH SECURITY SYSTEM
Quick Guide to Home Automation Functions
Full Home Automation Guide Available Online: This Quick Guide describes the most frequently used features and functions of
your system. For full
http://www.security.honeywell.com/hsc/products (see LYNX Touch Security System Home Automation Guide P/N 800-
16091 or higher). The full version Home Automation Guide is also available from your installer upon request.

General Information

The Honeywell LYNX Touch control is a security enabled Z-Wave® device that is designed to automate devices in a home control
network. The control allows you to easily add and control multiple devices with the press of a button and supports Z-Wave Network
Wide Inclusion (NWI) mode.
Management of Z-Wave devices, which are also known as nodes or modules, includes two main operations; inclusion/exclusion and
control. This section describes how to Include (add) devices into your home control network, edit devices and Exclude (delete)
devices. Automation and Z-Wave functions are accessed via the LYNX Touch Automation icon, Z-Wave Device Management and Z-
Wave Advanced Tools screens. The devices can be controlled from the LYNX Touch control or a Mobile Device. Once the Z-Wave
devices have been Included (added) to the network they can be controlled either manually or through "Scenes" that are programmed
using your LYNX Touch control's Automation features.
Check with your Installer to see which features are available with your system.
Automation is intended for lifestyle convenience. It should not be used for life safety or property protection.
U L
Z-Wave automation functionality is supplementary only and has not been evaluated by UL.
The Automation icon on the LYNX Touch Home Screen provides access to Z-Wave Home Automation features. (For
additional information regarding terms and functions refer to the Z-Wave Glossary included in LYNX Touch Security
System Home Automation Guide P/N 800-16091 or higher). A list of compatible Z-Wave Devices can be found in the
LYNX Touch Security System Home Automation Guide P/N 800-16091 or higher.
Automation
Z-Wave® System Basics
LYNX Touch Z-Wave options are displayed on two Automation Screens. The down  and up  arrows are used to scroll between the
two screens. Advance tools functions are displayed on the Z-Wave Device Management Screen. Refer to the full Home Automation Guide
P/N 800-16091 for complete information.
Automation Screen (Page 1) Options
Button
Switches Provides access to the Switches Screen
68
Thermostats Provides access to the Thermostats Screen
Locks Provides access to the Locks Screen
Water Valves Provides access to the Water Valves Screen
Provides access to control Garage Door
Garages
operation.
Displayed if a device failure is detected in
the Z-Wave network (For additional
Press To See information Refer to the Failed Device
section of LYNX Touch Security System
Failed devices
Home Automation Guide P/N 800-16091 or
higher)
Z-Wave and Z-Wave Plus are registered trademarks of Sigma Designs and its subsidiaries in the United States and other countries.
details of all functions,
Function
please see the system's
Automation Screen (Page 2) Options
Button
Scenes
Schedules
Rules
Tools
Garage door
setup
Other Devices
Home Automation located
Functions
Provides access to the Scenes Screen. Up
to 20 scenes can be programmed.
Provides access to the Schedules Screen.
Provides access to the Rules Screen.
Provides access to the Z-Wave Device
Management Screen
Provides access to program/enroll
Garage Door Openers.
Provides access to control Unknown or
Unsupported Devices using basic On/Off
commands
online at: