Honeywell LYNX Touch Security System User Manual page 48

USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
Automation
Ready To Arm
Switches
68
Thermostat
Locks
Tools
Ready To Arm
Rules 1 Rules 2
New New
Rules 3 Rules 4
New New
Rules 5 Rules 6
New New
Edit
Ready To Arm
Clear
ABC...
Ready To Arm
Name
Type
Disabled
2. Select the "Rules" button. The system displays
Rules
Schedules
Scenes
5100-100-007-V0
Delete
5100-100-070-V0
4. If desired you can enter a Rule Name. Select
Note: Select the "ABC..." key to switch the keyboard
5. Once you are finished, select "Done". The
Done
5000-100-190-V0
6. Select the "Type" button. Dependant upon what
01
Save
5000-100-188-V0
– 48 –
the Rules screen.
4. Select a "Rules" key followed by the Edit
button. The system displays a keyboard.
Note: Rules 21-40 are
TotalConnect Service.
the "Clear" key and then enter up to 13
characters of text.
between upper/lower case or the "123!@#" key to
switch to numbers.
system returns to the Rules screen.
features are programmed in your control the
system toggles between the following Types:
Disabled
Trigger Output
Scene
(displayed when Z-Wave has been enabled)
To Ph. 1 (Message to Phone 1)
To Ph. 2 (Message to Phone 2)
To Ph. 1 & 2 (Message to Phone 1 & 2)
Email 1
Depending upon the Type selected, the system
displays several new programming fields.
only accessible through