Chime Mode - Honeywell LYNX Touch Security System User Manual

SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES

Chime Mode

Chime Mode
Your system can be set to provide you with an audible alert of the opening of a door, while it
is disarmed, by using Chime mode. When activated, three beeps will sound at the control
whenever a protected perimeter door is opened and the zone voice descriptor will be
announced, if programmed. Additionally, the faulted zone information will be displayed on
the home screen. Selecting the "Zones" icon displays the open protection points. The Chime
mode can be turned on only when the system is disarmed.
Turning Chime Mode On or Off
Ready To Arm
Arm Away Arm Stay
Delay 10:18 AM June 8, 2010
Ready To Arm
Brightness
Contrast
Volume
Voice Chime
Tools
Dashboard Settings
Back
5100-100-003-V0
Clean
Ringer
Save
5100-100-088-V0
– 32 –
1. With the system in the disarmed or armed
state, select the "Settings" icon from the
second page of the Home Screen. The
system displays the Settings screen.
2. Select the "Chime" icon. The system toggles
between "Off" and "On". When "On" is
selected, the Chime mode will be active.
3. Select the "Save" button to save your new
settings.