Message Recording And Playback - Honeywell LYNX Touch Security System User Manual

The LYNX Touch Message Center allows you to record, play and delete messages. The
maximum message duration is 184 seconds.
NOTES: (1) If the system loses electrical power, all messages will be erased.
(2) Message Play/Record will not be available if a report must be sent.
Entering Message Mode
Ready To Arm
Arm Away Arm Stay
Delay
10:18 AM June 8, 2010
Recording a Message
Ready To Arm
No items to display!
Add New Play
Ready To Arm
Message 1
Time Remaining : 184 Seconds
Record Play

Message Recording and Playback

1.
72
Zones Automation
Message Phone
More
5000-100-006-V1
1. Select "Add New". The system displays the
Note: The System will display the total
Delete All Save
5000-100-045-V0
2. Select "Record", the system sounds a single
Stopped
3. When you are finished recording your
4. To listen to the message, select "Play".
5. If you wish to delete the message, select
Delete
6. Record additional messages as required.
5000-100-047-V0
– 41 –
USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
With the system in the disarmed state,
select the "Message" icon from the Home
Screen. The system displays the Message
screen.
Record Message screen.
message recording time available.
tone. Speak into the microphone and record
your message.
message, select. "Stop"
"Delete".