24-Port Fxs Port Adapter; Port T1 And E1 Port Adapters - Cisco 6500-E Installation And Verification Manual

Figure 2
WS-SVC-CMM-6T1
6-Port T1 Interface Port Adapter
WS-SVC-CMM-6E1
6-Port E1 Interface Port Adapter
Table 3
Color
Green
Red
Yellow
Off

24-Port FXS Port Adapter

The front panel features of the 24-port FXS port adapter are as follows:
•
•
Warning If the symbol of suitability with an overlaid cross appears above a port, you must not connect the
port to a public network that follows the European Union standards. Connecting the port to this type
of public network can cause severe personal injury or can damage the unit. Statement 1031
Figure 3
Cisco Communication Media Module for Catalyst 6500 Series Switch and Cisco 7600 Series Router Installation and Verification Note
6-Port T1 and E1 Port Adapter Front Panel Features
Receive port LEDs
0 1 2 3
RJ-45 connectors
Receive port LEDs
0 1 2 3
RJ-45 connectors
6-Port T1 and E1 Port Adapters Receive Port LEDs
Description
T1/E1 interface is operational.
T1/E1 receive alarm.
T1/E1 remote alarm.
T1/E1 interface has been administratively shut down, or there is no
power.
Receive port LEDs—The LEDs on the front panel indicate the status of each FXS interface.
describes the receive port LED operation.
RJ-21 connector—See the
for details.
shows the front panel of the 24-port FXS port adapter.
4 5
4 5
"RJ-21 Port Connector and Cabling Specifications" section on page 27
Front Panel Descriptions
Table 4
5