6-Port T1 And E1 Port Adapters - Cisco 6500-E Installation And Verification Manual

Front Panel Descriptions
Table 2
Color
Green
Red
No light

6-Port T1 and E1 Port Adapters

The front panel features of the 6-port T1 and E1 port adapters are as follows:
•
•
Figure 2
Cisco Communication Media Module for Catalyst 6500 Series Switch and Cisco 7600 Series Router Installation and Verification Note
4
Rear Module STATUS LED
Description
Port adapter in slot 4 is up and operational.
Port adapter in slot 4 is shut down.
Slot 4 port adapter is not located by the system.
Receive port LEDs—The LEDs on the front panel indicate the status of each T1 and E1 interface.
Table 3 describes the receive port LED operation.
RJ-45 connectors—See the
for details.
shows the front panels of the 6-port T1 and E1 port adapters.
"RJ-45 Port Connector and Cabling Specifications" section on page 25