Table of Contents
Advertisement
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Figure 4-7
Configuring a WNDAP330 as a Point-to-Point Bridge
To configure a point-to-point bridge as shown in
Figure
4-8:
1. Under the Configuration tab, select Wireless Bridge on the main menu. Then, select Bridging
and Repeating. The Bridging and Repeating screen will display.
2. Configure the WNDAP330 (AP1) on LAN Segment 1 in Point-to-Point Bridge mode.
4-14
Advanced Configuration
v1.0, May 2008
Advertisement
Table of Contents
