ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
5. Verify connectivity across the LAN 1 and LAN 2.
A computer on either LAN segment should be able to connect to the Internet or share files and
printers of any other PCs or servers connected to LAN Segment 1 or LAN Segment 2.
6. Click Apply to save your settings.
Configuring a Point-to-Multi-Point Wireless Bridge
To configure a point-to-multi-point wireless bridge as shown in
1. Under the Configuration tab, select Wireless Bridge on the main menu. Then, select Bridging
and Repeating. The Bridging and Repeating screen will display.
Figure 4-9
2. Configure the Operating Mode of the WNDAP330 Wireless Access Points.
4-16
v1.0, May 2008
Figure
4-9:
Advanced Configuration