Table of Contents
Advertisement
The ProSafe 802.11n Dual Band Wireless Access Point WNDAP330 (AP) can be configured
either through the command line interface (CLI), a Web browser, or an MIB browser. The CLI
allows viewing and modification of the configuration from a terminal or PC through a telnet
connection.
Command Sets
keyword
-------------------------------------- ----------------------
|-backup-configuration
|-config>
| |-apname
| |-country
| |-dhcp>
| | |-dns-server
| | |-gateway
| | |-ip-address
| | |-lease-time
| | |-status
| | |-subnet-mask
| | |-wins-server
| |
| |-http-redirect
| |-http-redirect-url
| |-interface>
| | |-wlan>
| | | |-2.4GHz>
| | | | |-aggregation-length
| | | | |-ampdu
| | | | |-beacon-interval
| | | | |-channel
and wireless mode)
| | | | |-channelwidth
| | | | |-dtim-interval
| | | | |-extension-protection-spacing --wireless extension protection spacing
| | | | |-fragmentation-length
only)
Command Line Reference
Command Line Reference
Description
--backup configuration
--configuration setting
--access point name
--country/region
--DHCP server
--DNS server
--default gateway
--IP range
--lease time
--status
--subnet mask
--WINS server
--enable HTTP redirection
--HTTP redirection URL
--select wireless lan interface
--wireless LAN interface setting
--2.4 GHz wireless LAN interface setting
--aggregated packet size
--aggregated MAC Protocol Data Unit
--wireless beacon period in TU(1024 us)
--wireless channel (depends on country
--wireless channel width
--wireless DTIM period in beacon interval
--wireless fragmentation threshold(even
v1.0, May 2008
Appendix C
C-1
Advertisement
Table of Contents
