NETGEAR WNDAP330-100NAS User Manual page 98

Prosafe 802.11n dual band wireless access point
Hide thumbs Also See for WNDAP330-100NAS:
Table of Contents

Advertisement

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
3. Select the 802.11b/g/n tab. The Advanced Wireless Settings screen you selected will display,
as shown in
Figure
Figure 4-3
4. Enter the appropriate information in the fields described below:
RTS Threshold (0 - 2347): Request to Send Threshold. The packet size that is used to
determine if it should use the CSMA/CD (Carrier Sense Multiple Access with Collision
Detection) mechanism or the CSMA/CA mechanism for packet transmission. With the
CSMA/CD transmission mechanism, the transmitting station sends out the actual packet
as soon as it has waited for the silence period. With the CSMA/CA transmission
mechanism, the transmitting station sends out an RTS packet to the receiving station, and
waits for the receiving station to send back a CTS (Clear to Send) packet before sending
the actual packet data. The default is 2347.
Fragmentation Length (256 - 2346): This is the maximum packet size used for
fragmentation. Packets larger than the size programmed in this field will be fragmented.
The Fragment Threshold value must be larger than the RTS Threshold value. The default
is 2346.
4-6
4-3.,
v1.0, May 2008
Advanced Configuration

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wndap330

Table of Contents