Table of Contents
Advertisement
4. Under the Configuration tab, select Security from the main menu, and then select either
Security Profile Settings for 802.11b/g/n or 802.11a/n. The screen for the Profile Settings you
selected will display. When the Security Profile screen displays, check the radio button of the
Security Profile you want to modify and click Edit.
5. From the Network Authentication drop-down menu, select WPA & WPA2 with RADIUS
from the list. By default, Data Encryption will be set to TKIP+AES.
6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
7. Click Apply to save your settings.
Configuring WPA-PSK
Not all wireless adapters support WPA. Furthermore, client software is required on the client.
Windows XP and Windows 2000 with Service Pack 3 or above include the client software that
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
Consult the product document for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
Figure 2-21
Basic Installation and Configuration
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
v1.0, May 2008
2-39
Advertisement
Table of Contents
