Using Activity Log Information - NETGEAR WNDAP330-100NAS User Manual

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Figure 3-9
2. Enable SysLog – Enable this option if you have a SysLog server on your LAN. If enabled,
you must enter the IP address of your SysLog server and the port number your SysLog server
is configured to use. The default is Disabled.
3. SysLog Server IP Address –The access point will send all the SysLog to the specified IP
address if SysLog option is enabled. Default is 0.0.0.0.
4. Port Number – The port number configured in the SysLog server on your LAN. Default is
514.
5. Click Apply to save your Syslog settings.

Using Activity Log Information

The Activity Log screen displays the Access Point system activity.
3-12
v1.0, May 2008
Management