Configuring Motion Detection - Cisco WVC200 - Wireless-G PTZ Internet Camera Administration Manual

Sample Configurations for the Cisco WVC210 Internet Camera

Configuring Motion Detection

Configuring Motion Detection
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
Motion Detection cannot be configured using the Firefox browser. Internet Explorer
must be used to configure motion detection.
To set the motion detection area of the video image to be examined and adjust the
sensitivity of detection, follow these steps:
Access the setup options for your Cisco WVC210 Internet camera by clicking
Setup.
Log in as required.
Go to the Applications > Motion Detection window.
Under Event, check Enable E-mail Alert.
A message window is displayed; click OK.
Click Save to save your settings.
9
83