Audio/Video > Audio Settings - Cisco WVC200 - Wireless-G PTZ Internet Camera Administration Manual

Configuring the Cisco WVC210 Internet Camera Software
Audio/Video
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
Audio/Video > Audio Settings
Audio is disabled by default.
• Enable Audio—Enable audio by checking the check box. When audio is
enabled, an icon is displayed on the Home window and audio is picked up
through the camera. You can then use the icons to turn audio on and off.
Audio On
Audio Off
Audio Mode Settings
Simplex—Talk Only
Simplex—Listen Only
Half Duplex—Talk or Listen
(Not simultaneously)
Full Duplex—Talk and Listen
(Can be simultaneously)
Function
Enables the speaker jack.
Enables the microphone jack.
Enables the speaker and microphone
jack but only one can be used at a time.
Enables the speaker and microphone
jack and both can be used
simultaneously.
8
62