Applications > Mail - Cisco WVC200 - Wireless-G PTZ Internet Camera Administration Manual

Configuring the Cisco WVC210 Internet Camera Software
Applications > Mail
Applications > Mail
NOTE
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
Clicking on the Applications > Mail window shows options for Primary and
Secondary SMTP Servers and E-mail Setup.
Only one SMTP server is used, even if both the primary and secondary SMTP
servers are enabled. The secondary SMTP server is used if the camera can't
connect to the primary server.
Primary SMTP Server
• Enable Primary SMTP—Check the box to enable an SMTP Server. This is
disabled by default.
• SMTP Mail Server—Enter the address of the Simple Mail Transport
Protocol (SMTP) server to be used to send e-mail.
• Port—Enter the port number for the mail server. The default is 25.
8
64