Connecting the Cisco WVC210 Camera
Connecting to a Wired Network for Setup
Connecting to a Wired Network for Setup
STEP 1
STEP 2
STEP 3
STEP 4
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
You must perform the initial configuration of the Cisco WVC210 camera from a
personal computer connected to the camera using a wired connection to the LAN
port. The initial configuration cannot be performed over a wireless connection.
Connect the antenna to the antenna connector on the camera.
(Optional) The Cisco WVC210 camera includes a camera desktop stand. Set the
bottom of the camera into the stand.
Place the camera, and adjust its aim accordingly.
Connect the included Ethernet network cable to the network router or switch.
Network Switch,
or Router
PC connected
to Network
4
15