Cisco WVC200 - Wireless-G PTZ Internet Camera Administration Manual page 40

Upgrading the Cisco WVC210 Internet Camera Firmware
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
NOTE
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
To upgrade the camera firmware, follow these steps:
Click Download Software on the
Cameras page. Login is required.
Follow the online directions to download the appropriate firmware.
Launch the web-based configuration utility. See
Configuration Utility, page
Click Setup in the toolbar.
Click Administration > Maintenance link in the navigation tree.
Click Upgrade Firmware.
Click Browse to find the extracted file, and then double-click the filename.
Click Start Upgrade, and follow the on-screen instructions. Click Cancel to cancel
the firmware upgrade.
Cisco recommends that you upgrade the camera's firmware within your network;
in other words, use a computer within the camera's local network. If you attempt to
upgrade the camera's firmware from a remote location—using a computer outside
of the camera's local network—the upgrade may fail.
Cisco Small Business Video Surveillance
Launching the Web-Based
36.
6
34