Applications > Smb/Cifs - Cisco WVC200 - Wireless-G PTZ Internet Camera Administration Manual

Configuring the Cisco WVC210 Internet Camera Software
Applications > SMB/CIFS
Applications > SMB/CIFS
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
The Applications > SMB/CIFS window shows options for SMB/CIFS. SMB/CIFS
allows the camera to record directly into a Network Attached Storage (NAS)
device. There is no need to record to a computer and keep a computer active all
the time.
• Enable SMB/CIFS Recording—When enabled, provides seamless file
recording and uploading to a NAS device. The TCP/IP protocol installed on
the NAS device is used for file transfer.
• SMB/CIFS Server—Enter the server hostname or IP address of your NAS
device (SMB/CIFS host server).
• Login Name—Enter your login name for the NAS device.
• Password—Enter your password for the NAS device.
• Upload Path—Enter the folder name to upload video to your NAS device
(SMB/CIFS host server).
• Maximum Size of Each File (MB)—Enter the maximum upload size of each
file to upload to the NAS device. The default is 10 MB.
• Enable adding timestamp to files—Enabled by default. A timestamp is
added to each recorded file and there will be multiple recorded files. Older
files will not be over-written, so the size of your recording continuously
grows. If disabled, the first video image is timestamped; any images saved
thereafter are not timestamped.
8
68