Cisco WVC200 - Wireless-G PTZ Internet Camera Administration Manual page 67

Configuring the Cisco WVC210 Internet Camera Software
Audio/Video
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
- Max Frame Rate—Select the desired maximum frame rate. The default
maximum frame rate is set to 15 fps.
- Access Code—Entered at the end of a URL to access a live video
camera feed through another source, for example, a cell phone
connection:
rtsp://<IP Address>/access_code
Adjustments
• Power Line Frequency—Select the power frequency (50Hz or 60Hz) used
in your region to improve the picture quality under fluorescent lighting.
• Color Balance—Select the desired option to match your environment to
obtain a better image. Options are: auto, indoor (incandescent), fluorescent
(white and yellow light), outdoor, or black and white.
• Exposure—Adjust the exposure to obtain a better image. For example, if the
camera is facing a bright light, the image may be too dark. In this case, you
should increase the exposure. You can select an exposure value between
-3 and 3.
• Sharpness—Adjust the sharpness to obtain a better image. You can select
a sharpness value between -3 and 3.
Video Options
• Flip Image—Enable this feature if you want to rotate the image 180° on the
vertical axis.
• Mirror Image—Enable this feature if you want to rotate the image 180° on
the horizontal axis.
• Enable Time Stamp—Enable this feature by checking the check box if you
want to display a time stamp on your video.
• Enable Text Display—Enable this feature by checking the check box, if you
want to display text on the video. The text can be up to 20 characters in
length. This feature is often used to identify the camera location when
multiple cameras are installed.
8
61