Cisco WVC200 - Wireless-G PTZ Internet Camera Administration Manual page 71

Configuring the Cisco WVC210 Internet Camera Software
Applications > Mail
NOTE
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
• Authentication—Check the box if your mail server requires authentication
and enter the following options:
- Account Name—Enter the account name to be used on the e-mail
server.
- Password—Enter the password associated with the account name.
• Test SMTP Server—Sends a test e-mail to verify the connection with the
SMTP Mail server.
Secondary SMTP
• Enable Secondary SMTP—Check the box to upload to the Secondary
SMTP server if the camera can not connect to the primary SMTP server.
• SMTP Mail Server—Enter the address of the SMTP server to be used to
send e-mail.
• Port—Enter the port number for the mail server. The default is 25.
• Authentication—Check the box if your mail server requires authentication
and enter the following options:
- Account Name—Enter the account name to be used on the e-mail
server.
- Password—Enter the password associated with the account name.
E-mail Setup
• Send To—Enter at least one (1) e-mail address; the 2nd and 3rd addresses
are optional. The e-mail alert will be sent to the e-mail address or
addresses specified here.
• Show "From" as—Enter the e-mail address to be shown in the From field
when the e-mail is received.
• Subject—Enter the desired text to be shown as the subject for the e-mail
when it is received. The maximum field length is 48 characters.
The Cisco WVC210 camera does not support Secure Sockets Layer (SSL)
protocols used by many e-mail providers, such as Gmail. Therefore you will not be
able to use Simple Mail Transport Protocol (SMTP) Mail servers like Gmail that
require SSL encryption. You can only use e-mail providers that do not require SSL
encryption. Please contact your e-mail provider if you are not sure whether your
SMTP server uses SSL encryption.
8
65