Configuring E-Mail Alerts - Cisco WVC200 - Wireless-G PTZ Internet Camera Administration Manual

Sample Configurations for the Cisco WVC210 Internet Camera

Configuring E-Mail Alerts

Configuring E-Mail Alerts
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
When using motion detection, you may want to be advised by e-mail when
something is detected. Configure your e-mail settings first, and then configure
Motion Detection. See
The Cisco WVC210 camera does not support Secure Sockets Layer (SSL)
protocols used by many e-mail providers, such as Gmail. Therefore you will not be
able to use SMTP Mail servers like Gmail that require SSL encryption. You can only
use e-mail providers that do not require SSL encryption. Please contact your e-mail
provider if you are not sure whether your SMTP server uses SSL encryption.
To configure e-mail alerts, follow these steps:
Access the setup options for your Cisco WVC210 Internet camera by clicking
Setup.
Log in as required.
Go to the Applications > Mail window.
Check the box to enable an SMTP Server.
Provide the SMTP server name or the IP address and port number of the SMPT
server. An account name and password are only required if your mail server
requires authentication.
Configuring Motion Detection, page
9
83.
81