Cisco AS5350 - Universal Access Server Configuration Manual page 123

Chapter 5 Managing and Troubleshooting the Universal Port Card
FastEthernet0/0
FastEthernet0/1
Virtual-Access2
Virtual-Access3
AS5400##
Show interface wedge process running again. (Process is running now.)
Step 9
AS5400##show proc cpu | i Intf
39
Wedge Interface Input Procedure
The following procedure shows an example of how to enable, disable, and show the results of wedged
interface input:
Step 1 Show wedged interfaces. (Interfaces are already wedged.)
AS5400##sh wedged-interfaces input
Interface
Async4/00
Async4/01
Async4/02
Async4/03
FastEthernet0/0
FastEthernet0/1
Virtual-Access2
Virtual-Access3
AS5400##
AS5400##
Step 2 Show interface wedge process running.
AS5400##sh proc cpu | i Intf
39
AS5400##
AS5400##
AS5400##
Disable interface monitor.
Step 3
AS5400##conf t
Enter configuration commands, one per line.
AS5400#(config)#no interface-monitor enable
AS5400#(config)#^Z
AS5400##
AS5400##
AS5400##
Step 4 Show interface wedge process running again. (No process is running now.)
AS5400##sh proc cpu | i Intf
AS5400##
AS5400##
Step 5 Show wedged interface input. (No input.)
AS5400##show wedged-interfaces output
Interface
AS5400##
AS5400##
OL-3418-02 B0
00:26:29
00:26:44
00:40:12
00:40:12
0 25 0
Time Since Wedge
00:21:58
00:21:51
00:21:26
00:21:21
11:58:28
11:58:46
00:08:46
00:08:46
0 21 0
Time Since Wedge
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
0.00% 0.00% 0.00% 0 Intf Wedge Monit
0.00% 0.00% 0.00% 0 Intf Wedge Monit
End with CNTL/Z.
Interface Queue Wedge Monitor
5-25