Status; System Status; Image Status; Network Status - Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera Administration Manual

Configuring the Cisco WVC210 Internet Camera Software

Status

Status
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
The Status window shows options for System, Image, Network, Wireless, and
Syslog.

System Status

• Firmware Version—Version of the firmware currently installed.
• MAC Address—Displays the MAC address of the camera.
• Camera Name—Displays the name of the camera, as defined on the Basic >
Device Settings window. By default, the last six digits of the camera name
come from the last three bytes of the MAC address.
• Description—Displays the description of the camera, as defined on the
Basic > Device Settings window.
• Date/Time—Displays the current date/time as configured on the camera.

Image Status

• MPEG-4/MJPEG
- Resolution—Displays the image size of the video stream.
- Image Quality—Displays the image quality of the video stream.
- Frame Rate—Displays the frame rate of the video stream.

Network Status

• Network Type— Displays the type of network the camera is connected to.
• IP Address— Displays the IP address assigned to the camera.
• Subnet Mask—Displays the subnet mask assigned to the camera.
• Gateway—Displays the IP address of the gateway used by the camera.
• Primary DNS—Displays the IP address of the primary Domain Name Server
used by the camera.
• Secondary DNS—Displays the IP address of the secondary Domain Name
Server used by the camera.
8
59