Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera Administration Manual page 52

Configuring the Cisco WVC210 Internet Camera Software
Audio/Video
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
Mobile Settings
• Enable Mobile Streaming—Enable streaming video for the mobile devices
by selecting this option.
- Resolution—Shows the default resolution of 160x120.
- Video Quality Control—Choose from one of the following options:
- Fixed Bit Rate—Select the desired fix bit rate. The default bit rate is
set to 32 Kbps.
- Fix Quality—Select the desired image quality. The default image
quality is set to Normal.
- Max Frame Rate—Select the desired maximum frame rate. The default
maximum frame rate is set to 15 fps.
- Access Code—Entered at the end of a URL to access a live video
camera feed through another source, for example, a cell phone
connection:
rtsp://<IP Address>/access_code
Adjustments
• Power Line Frequency—Select the power frequency (50Hz or 60Hz) used
in your region to improve the picture quality under fluorescent lighting.
• Color Balance—Select the desired option to match your environment to
obtain a better image. Options are: auto, indoor (incandescent), fluorescent
(white and yellow light), outdoor, or black and white.
• Exposure—Adjust the exposure to obtain a better image. For example, if the
camera is facing a bright light, the image may be too dark. In this case, you
should increase the exposure. You can select an exposure value between
-3 and 3.
• Sharpness—Adjust the sharpness to obtain a better image. You can select
a sharpness value between -3 and 3.
Video Options
• Flip Image—Enable this feature if you want to rotate the image 180° on the
vertical axis.
• Mirror Image—Enable this feature if you want to rotate the image 180° on
the horizontal axis.
8
46