Changing Your Network Mode - Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera Administration Manual

Connecting the Cisco WVC210 Camera

Changing Your Network Mode

STEP 7
Changing Your Network Mode
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
Verify that the camera LEDs are lit.
After the initial configuration, you can use the camera in one of two modes: wired
or wireless. You cannot use the camera in both modes simultaneously.
When you move the camera from a wired network to a wireless network, or vice
versa, you must power off the camera before connecting to the new network.
Unplugging the Ethernet cable does not automatically switch the camera to
wireless mode.
4
17