Configuring The Network Settings - Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera Administration Manual

Installing the Cisco WVC210 Internet Camera Software

Configuring the Network Settings

Configuring the Network Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
• Date—Enter the current date This sets the camera's calendar date and the
information is used when the date stamp is referenced in the image
captures.
• Time—Enter the current time. This sets the camera's clock and is used when
the time stamp is referenced in the image captures.
You have now finished identifying the camera and configuring the basic settings.
To continue configuring the camera, click Next.
Follow these steps to configure the network settings of the camera. These steps
continue from the previous section.
In the Network Settings window, if you want to assign the IP address, then select
Static IP address, otherwise leave the default setting, Obtain An IP Address
Automatically (DHCP). Click Next to continue.
The current settings of the camera are displayed. Make any changes as needed
for your network, and then click Next to continue.
A confirmation window appears. Click Next to confirm the settings, or Back to go
back and make any changes.
In the confirmation window, click OK to continue or click Cancel to close the
window. If you click Cancel, you can then click Back and make changes.
Once OK is clicked, the new settings are saved.
A dialog box appears informing you that your configuration has been saved
successfully. Click OK to continue
Congratulations! Your camera is now configured. Click Finish to complete the
process.
.
5
22