Applications > Ftp - Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera Administration Manual

Configuring the Cisco WVC210 Internet Camera Software
Applications > FTP
Applications > FTP
NOTE
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
Clicking on the Applications > FTP window shows options for Primary and
Secondary FTP.
Only one FTP server is used, even if both the primary and secondary FTP servers
are enabled. The secondary FTP server is used if the camera can't connect to the
primary server.
Primary FTP
• Enable Primary FTP—Check the box to enable the FTP server. This is
disabled by default.
• FTP Server—Enter the address of the primary FTP server.
• Port—Enter the port number of the FTP Server. The default is 21.
• Login Name—Enter the login name associated with the specified primary
FTP server.
• Password—Enter the password associated with the login name for the
primary FTP server.
• Enable Passive Mode—Check the box to enable the passive mode feature.
Passive mode is a more secure form of data transfer. The use of passive
mode FTP ensures all data flow initiation comes from inside the network
rather than from the outside.
• File Path Name—Enter the desired file path name on the primary FTP
server.
Secondary FTP
• Enable Secondary FTP—Enable this option to allow the camera to connect
to a secondary FTP server if the primary FTP server is not available.
• FTP Server—Enter the address of the secondary FTP server.
• Login Name—Enter the login name associated with the secondary FTP
server.
• Password—Enter the password associated with the login name for the
secondary FTP server.
8
51