Pan/Tilt Control; Rotation Sequence - Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera Administration Manual

Configuring the Cisco WVC210 Internet Camera Software
Pan/Tilt Settings
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide

Pan/Tilt Control

• Pan/Tilt Movement—Check On if you want to use the Pan/Tilt Movement
feature.
• Default Home Position—Click to reset to the default home position.

Rotation Sequence

• Rotation Sequence Window—This feature determines how the camera will
move when it is set to Rotate. You can set a number of Preset Positions; the
camera will go to the first position, then move through the list of preset
positions until it is finished. The camera will stop at the last position in the
list.
- To create the Preset Sequence, select the desired Preset Position in the
left column, and click Add >>. Repeat until the desired sequence is
complete. Note that you can add the same Preset Position more than
once; this can be used to make the camera stay longer at one position.
- To delete a position from the Sequence, select the desired position and
click Delete.
• Time—Determines how long the camera will stay at each position while
executing the sequence. Set this to the desired value.
8
58