Status Leds - Cisco PTZ Installation Manual

PTZ IP Camera Physical Details
Figure 1-2
1
2

Status LEDs

Table 1-1
Table 1-1
LED
Green
Steady Red
Red LED unlighted
Steady Red + blinking Green every 1 sec.
Steady Red + Green LED unlighted
Steady Red + blinking Green every 2 sec.
Blinking Red every 0.15 sec. + blinking Green
every 1 sec.
Blinking Red every 0.15 sec. + blinking Green
every 0.15 sec.
Cisco Video Surveillance PTZ IP Camera Installation Guide
1-4
Inner View of the PTZ IP Camera
Board-to-board Connector
SD/SDHC/SDXC Card Slot
describes the LED indicator for each PTZ IP camera status state.
Status LEDs
Board to board connector.
Slot for the SD, SDHC, or SDXC card.
Status
Camera is done booting and is available for use.
Power on and system booting.
Power off.
Network works (heartbeat)
Network fail
Audio mute (heartbeat).
Upgrading firmware
Restore default
Chapter 1 Overview
1
2
OL-28954-01