Cisco 521G - Unified IP Phone VoIP Configuration Manual page 43

Chapter 3 Creating and Connecting to a Community
Step 8 If a Security Certificate Alert pop-up window appears (see
cannot be identified as a trusted site, you might want to examine the certificate by clicking View
Certificate. After examining the certificate, click Yes, No, or Always.
Figure 3-3
Step 9 If an Authentication: Device pop-up windows appears (see
username and password for the indicated device.
Note
Figure 3-4
When the discovery process complete, the discovered devices are listed in the Devices table
(see Figure
OL-15283-01
Security Certificate Alert Pop-Up Window
For the WLC526 controller and the CE500 switch, the default username and password are both
admin.
Authentication: Device Pop-Up Window
3-5).
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
Creating a Community of Devices Using the Connect Window
Figure 3-3) to indicate that a certificate site
Figure 3-4), enter the administrative
3-5