Cisco 521G - Unified IP Phone VoIP Configuration Manual page 83

Chapter 7 Adding Guest Access with Web Authentication
Step 2 Click Guest for a guest VLAN and
Note
Figure 7-3
Perform these steps:
Step 3
In the VLAN ID field, enter the VLAN ID that you want to associate with the guest VLAN. Use an
a.
ID in the range 2 to 1000. Do not enter 1; this ID is reserved.
Note
From the Port list, select a port (1 or 2) for the VLAN. The default is 1.
b.
In the IP Address field, enter an IP address for the VLAN.
c.
From the Subnet Mask list, accept the default or click the drop-down arrow and choose the subnet
d.
mask for the VLAN. The default is 255.255.255.0.
In the Gateway IP Address field, enter the IP address of the default gateway.
e.
In the DHCP Server IP Address field, enter the IP address of the DHCP server.
f.
When you complete this window (see
g.
window.
OL-15283-01
For a Guest VLAN type, the VLAN name field is set with a predefined VLAN name
(cisco-guest) and cannot be changed.
Create Guest VLAN Window
For Guest VLAN types, the VLAN name field is set with a predefined VLAN name that is based
on the selected VLAN type. It cannot be changed.
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
Figure 7-3 appears.
Figure 7-4), click OK to save your changes and to close the
Adding a Guest Access VLAN
7-3