Cisco 521G - Unified IP Phone VoIP Configuration Manual page 58

Adding a VLAN
Step 3 Perform these steps:
Enter a VLAN ID value (2 to 1000) into the VLAN ID field.
a.
Accept the auto generated VLAN name or enter a unique name in the VLAN Name field.
b.
Accept the displayed controller Port number or click the drop-down arrow and choose 2.
c.
Enter an IP address for the VLAN in the IP Address field.
d.
Accept the displayed subnet mask or enter a new subnet mask value.
e.
Enter the IP address for the Gateway (or router) in the Gateway IP Address field.
f.
Enter the IP address for the DHCP server in the DHCP Server IP Address field.
g.
When you reviewed your entries, click OK.
h.
When the pop-up message appears that indicates you should configure a DHCP server with IP addresses
Step 4
for the VLAN subnet (see
Figure 4-14
The VLANs window (see
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
4-12
Figure 4-14), you should record the reminder and click OK.
Info: Create VLAN Message Reminder
Figure 4-15) appears and contains the added VLAN.
Chapter 4 Creating and Modifying WLANs and VLANs
OL-15283-01