Step - Cisco 521G - Unified IP Phone VoIP Configuration Manual

Adding an Employee User
Figure 8-17
Click the drop-down arrow in the Hostname field and choose your controller.

Step 6

Step 7 Check Internal or Customized in the Web Login Page Type field.
Step 8 If you checked Internal, perform these steps:
a. Check Show to display the Cisco logo or check Hide to hide the Cisco logo.
In the Redirect URL after Login field, enter a URL to which the user will be redirected after logging
b.
in. The URL format is www.companyname.com and can contain up to 254 characters.
c. In the Headline field, enter the login page headline or summary, up to 127 characters. The default is
Welcome to the Cisco wireless network.
In the message field, enter the message text up to 2047 characters. The default message is shown in
d.
Figure
If you want to revert to the default settings, click Set Default.
e.
f. When complete, click OK and a web login pop-up message appears (see
Step
If you checked Customized,
Step 9
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
8-14
Web Login Window
8-17.
10.
Figure 8-18
Chapter 8 Adding Employee Access with Web Authentication
appears.
Figure 8-19). Go to
OL-15283-01