Cisco 521G - Unified IP Phone VoIP Configuration Manual page 30

Adding a New Controller
Figure 2-4
Verify that an Ethernet cable is not connected to any of the controller ports and click Next. The Step 3:
Step 2
Power up a device window appears (see
Figure 2-5
Step 3 Perform these operations:
Connect an AC power cable to the controller.
a.
When the power LED turns green, click Next. The Step 4: Connect your device to your PC/Laptop
b.
window appears (see
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
2-4
Step 2: Prepare a Device Window
Figure
Step 3: Power Up Device Widow
Figure 2-6).
Chapter 2 Adding a WLC526 Controller and LAP521 Access Points
2-5).
OL-15283-01