55.1.22 Annex I Enable Command
This command is available for the IES-1248-51 and IES-1248-51A.
Syntax:
ras> adsl annexi enable <portlist>
This command turns on the Annex I all digital mode feature on the specified ADSL2/2+
port(s). With Annex I, the ADSL connection uses the full spectrum of the physical line and the
user can not use POTS or ISDN service.
The following example turns on the Annex I feature for port 5.
Figure 250 Annex I Enable Command Example
ras> adsl annexi enable 5
55.1.23 Annex I Disable Command
This command is available for the IES-1248-51 and IES-1248-51A.
Syntax:
ras> adsl annexi disable <portlist>
This command turns off the Annex I all digital mode feature on the specified ADSL2/2+
port(s).
The following example turns off the Annex I feature for port 5.
Figure 251 Annex I Disable Command Example
ras> adsl annexi disable 5
55.2 Statistics ADSL Commands
Use these commands to display ADSL port statistics.
Chapter 55 ADSL Commands
IES-1248-51/51A/53 User's Guide
379