IES-1248-51/51A/53 User's Guide
50.4.2 IGMP Bandwidth Set Command
Syntax:
ras> switch igmpsnoop bandwidth set <index> <start-mcast-ip> <end-mcast-ip>
<bandwidth>
where
<index>
<start-mcast-
ip>
<end-mcast-ip>
<bandwidth>
This command configures bandwidth allocation for the multicast channel(s). For multicast
channel(s) for which you have not configured bandwidth settings, the default multicast
bandwidth setting applies (see the
50.4.3 IGMP Bandwidth Delete Command
Syntax:
ras> switch igmpsnoop bandwidth delete <index>
where
<index>
This command removes the specified multicast bandwidth configuration profile.
50.5 IGMP Bandwidth Port Commands
Use the IGMP bandwidth port commands to set up bandwidth budgets for multicast traffic on
specific ports.
50.5.1 IGMP Bandwidth Port Disable Command
Syntax:
ras> switch igmpsnoop bandwidth port disable <portlist>
332
1..96; a unique number for this setting.
=
224.0.0.0..239.255.255.255; the beginning of the multicast
=
range.
224.0.0.0..239.255.255.255; the end of the multicast range. It
=
must be greater than <start-mcast-ip>.
1..100000, in units of kbps
=
switch igmpsnoop bandwidth default
1..96; a unique number for this setting.
=
command).
Chapter 50 IGMP Commands