Figure 195 IGMP Snoop Info Statistics Command Example
ras> statistics igmpsnoop info
IGMP Snooping/Proxy is Disable
number of query
number of report
number of leave
number of groups
50.7.2 IGMP Group Statistics Command
Syntax:
ras> statistics igmpsnoop group [<vid> [<mcast_ip>]]
where
<vid>
<mcast_ip>
This command displays the information about IGMP groups learned on the system, specified
VLAN, or specified multicast address on the specified VLAN(s).
Figure 196 IGMP Group Statistics Command Example
ras> statistics igmpsnoop group
[group info]
group
--------------- ---- ------------------------------------------------ --
50.7.3 IGMP Port Info Statistics Command
Syntax:
ras> statistics igmpsnoop port info <portlist>
where
[portlist]
This command displays the number of IGMP-related packets received on the specified port(s).
The following figure shows the number of IGMP packets for port 1.
Chapter 50 IGMP Commands
= 0
= 0
= 0
= 0
The VLAN ID [1 – 4094].
=
The multicast IP address.
=
vid port
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
IES-1248-51/51A/53 User's Guide
337