Igmp Port Info Screen; Figure 84 Igmp Count; Table 39 Igmp Count - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide

Figure 84 IGMP Count

The following table describes the labels in this screen.

Table 39 IGMP Count

LABEL
IGMP Status
Port
Active
Count
Select
Active
Inactive
Select All
Select None

20.8 IGMP Port Info Screen

Use this screen to display the current number of IGMP-related packets received on each port.
To open this screen, click Advanced Application, IGMP, IGMP Port Info.
172
DESCRIPTION
Click IGMP Status to open the IGMP Setup screen where you can view current
IGMP information (see Section 20.3 on page
This field shows each ADSL port number.
This field shows whether or not the IGMP count limit is enabled on this port. "V"
displays if it is enabled and "-" displays if it is disabled.
Enter the maximum number of IGMP groups a subscriber on this port can join.
This has no effect if the IGMP count limit is disabled.
Select this, and click Active or Inactive to enable or disable the specified IGMP
count limit on this port.
Click this to enable the specified IGMP count limits on the selected ports.
Click this to disable the specified IGMP count limits on the selected ports.
Click this to select all entries in the table.
Click this to un-select all entries in the table.
166).
Chapter 20 IGMP