IES-1248-51/51A/53 User's Guide
where
<portlist>
This command forcibly enables the specified ADSL port(s).
55.1.3 ADSL Disable Command
Syntax:
ras> adsl disable <portlist>
where
<portlist>
This command forcibly disables the specified ADSL port(s).
Note: The factory default of all ports is enabled.
55.1.4 ADSL Profile Show Command
Syntax:
ras> adsl profile show [profile]
where
<profile>
This command displays the specified ADSL profile or all ADSL profiles if you do not specify
one.
364
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
A profile name.
=
Chapter 55 ADSL Commands