System Messages - Cisco CISCO1841 - 1841 Integrated Services Router Hardware Installation Manual

System Messages

Table 6-2 Port and Connection Indicators on Cisco 1800 Series Fixed-Configuration Routers (continued)
LED Indicator State
4
SPD Green
Off
4
BUSY Blinking green
1. This LED does not exist on Cisco 1812 routers.
2. This LED exists on Cisco 1801, Cisco 1802, and Cisco 1803 routers only.
3. This LED does not exist on Cisco 1811 routers.
4. This LED exists on Cisco 1811 routers only.

System Messages

This section describes system and recovery messages that may appear during operation of a Cisco 1800
series fixed-configuration router. Cisco IOS software displays system error and recovery messages on
an external device console terminal screen. (For more information, see the
Terminal or Modem" section on page
The terminal should display one of the following prompts:
Router>
or
Router#
The Cisco IOS software checks the system condition once every 30 seconds. If the condition still exists,
the error message appears again; if the error condition has cleared, a recovery message appears.
Table 6-3
them.
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
6-6
Meaning
Connection running at high
speed (V.90)
Connection running at low
speed (V.32/V.32b/V.34)
Activity on the analog
modem connection
(indicates the user EXEC command mode)
(indicates the privileged EXEC command mode)
describes system error and recovery messages and the LED conditions that might accompany
Corrective Action
Indication is for information only.
Indication is for information only.
Indication is for information only.
4-5.)
Chapter 6 Troubleshooting
"Connecting to a Console
OL-6425-03