Chapter 2 Preinstallation Requirements - Cisco CISCO1841 - 1841 Integrated Services Router Hardware Installation Manual

Preinstallation Requirements
This chapter describes the site requirements and equipment necessary for installing your Cisco 1800
series fixed-configuration integrated services router. This chapter includes the following sections:
Safety Recommendations, page 2-2
•
General Site Requirements, page 2-4
•
Installation Checklist, page 2-5
•
Creating a Site Log, page 2-6
•
Inspecting the Router, page 2-7
•
• Required Tools and Equipment for Installation and Maintenance, page 2-7
To see translations of the warnings that appear in this publication, see the
Note
Safety Information for Cisco 1800 Integrated Services Routers (Fixed)
routers, the
802.11a/b/g and 802.11b/g Radios
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Warning Before opening the unit, disconnect the telephone-network cables to avoid contact with
telephone-network voltages. Statement 1041
Warning This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260.
Incorrectly connecting this equipment to a general-purpose outlet could be hazardous. The
telecommunications lines must be disconnected 1) before unplugging the main power connector or 2)
while the housing is open, or both. Statement 1043
OL-6425-03
Declarations of Conformity and Regulatory Information for Cisco Access Products with
document that accompany your router.
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
2
C H A P T E R
Regulatory Compliance and
document and for wireless
2-1