Integrated 802.11A/B/G Radio Module (Wireless Models Only) - Cisco CISCO1841 - 1841 Integrated Services Router Hardware Installation Manual

Chapter 1 Overview
Table 1-3 Summary of LED Indicators on the Cisco 1800 Series Fixed-Configuration Routers (continued)
LED Color
2
CD Green
3
LPBK Green
PPP Green
VPN Green
4
LINK Green
4
B1 Green
4
B2 Green
5
SPD Green
5
BUSY Green
CF Green
1. Inline power is a field-upgradable option only. It is not installed by default.
2. This LED does not exist on the Cisco 1812.
3. This LED exists on the Cisco 1801, Cisco 1802, and Cisco 1803 only.
4. This LED does not exist on the Cisco 1811.
5. This LED exists on the Cisco 1811 only.
For LED troubleshooting information, including possible trouble causes and corrective actions, see
Table 6-1

Integrated 802.11a/b/g Radio Module (Wireless Models Only)

The Cisco 1800 series fixed-configuration routers with the wireless option have an integrated IEEE
802.11a/b/g radio module that operates as a wireless access point in infrastructure mode. The wireless
routers have two reverse-polarity threaded Neill-Concelman (RP-TNC) connectors on the back panel. The
dipole swivel antennas that were shipped with the router connect to the RP-TNC connectors to operate the
802.11a/b/g radio module.
OL-6425-03
Description
This LED indicates whether a connection is established (carrier detect). On the Cisco 1801,
Cisco 1802, and Cisco 1803 routers, this LED indicates whether a DSL connection is
established. On the Cisco 1811 router, this LED indicates whether a modem connection is
established.
On indicates a connection is established.
Off indicates no connection established.
On indicates the DSL interface is in loopback mode.
Off indicates DSL interface normal operation.
On if at least one PPP connection is established.
On if at least one VPN tunnel is established.
On indicates that an ISDN S/T connection has been established.
Off indicates that no ISDN S/T connection has been established.
Blinking green indicates activity on the first B channel.
Off indicates no activity on the first B channel.
Blinking green indicates activity on the second B channel.
Off indicates no activity on the second B channel.
On indicates a connection at high speed (V.90/V.92).
Off indicates a connection at low speed (V.32/V.32b/V.34).
Blinking green indicates activity over the modem line.
Off indicates no activity.
On when CompactFlash memory is busy. Do not remove CompactFlash memory when this
light is on.
in the "Troubleshooting"
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
chapter.
Hardware Features
1-5