Table of Contents
Advertisement
Symbol
EMC Considerations
Your Honeywell Analytics continuous gas monitor has been designed to comply with Electromagnetic
Compatibility (EMC) standards applicable at the time of its manufacturing. The design includes filtering, shielding
and bypassing techniques. At the time of certification, simulated customer Input/ Output (I/O) schemes were
tested.
All methods used in your equipment for emission suppression and reduction of susceptibility are interactive.
Modifications to the monitor could result in increased emissions and higher vulnerability to other radiated
fields.
Following the guidelines in this EMC Considerations section will ensure your monitor maintains the enhanced
degree of EMC integrity. The guidelines listed apply only to I/O emissions and do not apply to A.C. and D.C.
monitor power connections.
FCC Compliance Statement
CAUTION: Changes or modifications not expressly approved could void your authority to use this equipment.
This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
To satisfy FCC&IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between
TM
Vertex
VC4 System
Caution: possibility of electric shock
Caution: hot surface
Protective conductor terminal (ground terminal)
Description
7
User Manual
Advertisement
Table of Contents
