Start Program - Honeywell Vertex VC 4 User Manual

Start Program

Upon power-up, the HMI PC automatically starts Ubuntu (Linux) and loads the Vertex™ VC4 HMI program. After the
startup sequence, the Vertex™ VC4 HMI main screen opens as below. The start-up time may take several minutes,
and the default user is Viewer (R3).
`
NOTE
Any time the Vertex™ VC4 System is powered up, loss of communications may cause maintenance
faults. See Section "Acknowledge Notifications" for more information. for instructions to clear faults.
NOTE
Use the System Manager->Region and time menu to change the time and date on your Vertex™ VC4
System.
TM
Vertex VC4 System 37 User Manual