Table of Contents
Advertisement
2 Hardware Installation
System requirement
•
LAN or WAN Internet to connect server, via PC Ethernet ( network card or network cable) TCP/IP protocol （Windows
/NT/2000/XP) connect , suggest Internet Explorer 5.0 version or later.
•
Monitor and PC configuration:
CPU: PⅢ or latter, RAM: 512M or latter( Above DirectX8.1)
•
Monitor: 17",1920×1080 resolution
•
Operation system: Windows NT, Windows2000, Windows XP
Installation environment
Installation environment requirements
Far away from high-temperature resource and environment; improper place for ventilation; avoid install on shaky place.
Recommend operating environment
Temperature:-20 ~ +55℃
Humidity: Max 85%RH
Hardware Installation steps
Please make sure LAN and WAN are working order before installation of the IP camera . After checked all the network system in good
condition, keep your hands clean and dry, following the steps bellow.
•
Unpack the box to check the goods
•
Take out all goods which needed for installation from the box
•
Take off the camera upper cover, SD card installation steps as below
Figure 2- 1 HIDC-1600TVI
Honeywell
Micro SD card installation
site
2
Advertisement
Table of Contents
