Table of Contents
Advertisement
Protocol: Support Pelcod，Pellcop，PellcoF protocol
Address: 0-255 adjustable
Baud Rate: Serious baud rate selectable
Operation method: Connect analog high speed dome at the IP camera AB port, set the protocol and baud rate, and control the high
speed dome through IPC preview interface
After all parameters setting completed, click "Save" and the it comes into effect immediately.
Display settings
IP Camera "Display settings" interface as figure 3-13.
Name:Modify the appointed channel name
Time Format: Select different time display mode for the appointed channel
Date Format: Select different date display mode for the appointed channel
Bright: Adjust the brightness for the appointed channel
Contrast: Adjust the contrast for the appointed channel
Saturation: Adjust the saturation for the appointed channel
Figure 3-12
Figure 3-13
Honeywell
11
Advertisement
Table of Contents
