System specification setting
Device Info
IP Camera "Device Info" interface as figure 3-11.
Device Name: Edit the camera name
Device Sn: Display the device Sn
Device Type: Display the device type
Serial No. : Display the product serial No.
Master Version: Display the software version date
Hardware Version: Display the hardware version number
Format: Switch to select the PAL and NTSC image scanning system
Device Time: Set and display the device current time
After all parameters setting completed, click "Save" and then it comes into effect immediately.
PTZ setting
IP Camera "ePTZ Set" interface as figure 3-12.
Figure 3- 11
Honeywell
10