Table of Contents
Advertisement
Enable DDNS: Click to determine whether to use Dynamic Domain Name Server
Server Type: Select DDNS server type (There are Dyndns/ PeanutHull/ NO-IP/ 3322/ DnsDynamic five types selectable)
Server Name: Input server name, for example, member.3322.org
Port: Input port No.
Username: Input user name
Password: Input password
Confirm pwd: Input the password again to confirm it
Domain: Input the standby domain
After all parameters setting completed, click "Save" and the it comes into effect immediately.
NTP Settings
IP Camera "NTP Settings" interface as figure 3-21.
Enable NTP: Click to determine whether to use NTP
Figure 3-20
Figure 3-21
Honeywell
17
Advertisement
Table of Contents
