Table of Contents
Advertisement
Image Configuration
Image Configuration includes five submenus: Display, Video/Audio, OSD, Video Mask and ROI Config.
Display Configuration
Go to Image > Display interface as shown below. The image's brightness, contrast, hue and saturation and so on for common,
day and night mode can be set up separately. The image effect can be quickly seen by switching the configuration file.
Brightness: Set the brightness level of the camera's image.
Contrast: Set the color difference between the brightest and darkest parts.
Hue: Set the total color degree of the image.
Saturation: Set the degree of color purity. The purer the color is, the brighter the image is.
WDR: WDR can adjust the camera to provide a better image when there are both very bright and very dark areas simultaneously
in the field of the view by lowering the brightness of the bright area and increasing the brightness of the dark area.
Sharpness: Set the resolution level of the image plane and the sharpness level of the image edge.
Noise Reduction: Decrease the noise and make the image more thorough. Increasing the value will make the noise reduction
effect better but it will reduce the image resolution.
Defog: Activating this function and setting an appropriate value as needed in foggy, dusty, smoggy or rainy environment to get
clear images.
Antiflicker:
• Off: disables the anti-flicker function. This is used mostly in outdoor installations.
• 50Hz: reduces flicker in 50Hz lighting conditions.
• 60Hz: reduces flicker in 60Hz lighting conditions.
White Balance: Adjust the color temperature according to the environment automatically.
Frequency: 50Hz and 60Hz can be optional.
Day/night Mode: Please choose the mode as needed.
Sensitivity: High, middle and low can be selected for switching back and forth from day to night modes.
12
Performance Lite 2MP SD Camera - User Manual |
Configuration
Hide quick links:
Advertisement
Table of Contents
